Prof. Dr. Heiko Thömen

Entwicklung eines Schaltschranks für die Sicherheitsstromversorgung mit Funktionserhalt im Brandfall, 2021 - 2023

Stromleitende Möbelplatten, 2020 - 2022

Entwicklung von universell einsetzbaren Möbelverbindern für Leichtbauplatten, 2020 - 2022

Development of a fire retardant based on functionalized minerals, 2019 - 2021

Modellbasierte Automatisierung in der Holzwerkstoffindustrie, 2016 - 2021

Entwicklung eines Klebstoffsystems basierend auf Mikrofibrillierter Cellulose (MFC) für den Einsatz in Holzwerkstoffen, 2019 - 2020

Entwicklung biobasierter Gehäuseteile aus Altpapier- oder Frischzellstofffasern für elektronische Geräte, 2018 - 2020

Phenol- und formaldehydfrei gebundene Glaswolle-Dämmstoffe mit erhöhtem Brandwiderstand auf Basis natürlicher Gerbstoffe, 2017 - 2020

Smart Electronic Furniture, 2018 - 2019

Entwicklung einer flächenisotropen Bauplatte mit erhöhten Festigkeitseigenschaften für den tragenden Einsatz, 2017 - 2019

Entwicklung einer Technologie zur Herstellung kostengünstiger Verbindungsplättchen für den Möbelbau, 2016 - 2019

Prozesssteuerung von industriellen Schleifprozessen und Schleifbandmanagement auf der Basis einer Echtzeit - Werkzeugzustandserkennung, 2016 -2019

Ressobois - Holzfedern für Betten, 2016 - 2018

Entwicklung einer Technologie zum Einsatz multifunktionaler mineralischer Zusatzstoffe in Holzwerkstoffen mit dem Ziel, deren Wirtschaftlichkeit zu erhöhen und deren Brandwiderstand und Emissionsverhalten zu verbessern, 2015 - 2018

Ultraleichte bio-basierte Holzwerkstoffplatte, 2012 - 2016

Entwicklung einer Methode zur Nutzung von Oberflächenmerkmalen für die Optimierung des up-stream-Prozesses in der Span- und Faserplattenherstellung, 2014 - 2015

Tschannen, C., Thömen, H., & Shalbafan, A. (2023). Development of an Electrically Conductive MDF Panel—Evaluation of Carbon Content and Resin Type (Vol. 15, Issue 4). MDPI. https://doi.org/10.24451/arbor.18935

Shalbafan, A., & Thömen, H. (2023). Development of Mineral-Bonded Plywood with Magnesium Oxychloride as a Binder Using the Hot-Pressing Process (Vol. 15, Issue 4). MDPI. https://doi.org/10.24451/arbor.18919

Thömen, H., & Shalbafan, A. (2022). Influence of Pressing Schedule and Adhesive Content on the Rheological Behavior of Wood Fiber-Furnish Mats (Vol. 15, Issue 4). Springer. https://doi.org/10.24451/arbor.16671

Ozyhar, T., Tschannen, C., Thömen, H., & Zoppe, J. O. (2021). Evaluating the use of calcium hydrogen phosphate dihydrate as a mineral-based fire retardant for application in melamine-urea-formaldehyde (MUF)-bonded wood-based composite materials (Vol. 46, Issue 3). Wiley. https://doi.org/10.24451/arbor.16157

Shalbafan, A., Khojasteh Khosro, S., & Thömen, H. (2021). Development of ultra‑light foam‑core fibreboard for furniture application (Vol. 79). Springer. https://doi.org/10.24451/arbor.16161

13889

Ozyhar, T., Tschannen, C., Hilty, F., Thömen, H., Schoelkopf, J., & Zoppe, J. O. (2020). Mineral-based composition with deliquescent salt as flame retardant for melamine–urea–formaldehyde (MUF)-bonded wood composites (Vol. 55, Issue 1). Springer. https://doi.org/10.24451/arbor.13848

Shalbafan, A., Khojasteh-Khosro, S., & Thömen, H. (2020). Consumer behavior assessment regarding lightweight furniture as an environmentally-friendly product (Vol. 17, Issue 3). Taylor & Francis. https://doi.org/10.24451/arbor.13882

Shalbafan, A., & Thömen, H. (2020). Improving bio-based poly ( lactic acid ) properties using polycarbonate. 14th International Seminar on Polymer Science and Technology (ISPST 2020). https://doi.org/10.24451/arbor.13885

Thömen, H., & Tschannen, C. (2020). Development of a concept for electrically conductive furniture panels. Society of Wood Science and Technology International Convention. Society of wood science and technology. https://doi.org/10.24451/arbor.14184

Shalbafan, A., Khojasteh Khosro, S., & Thömen, H. (2020). Evaluation of Adhesion Strength of Coatings and Face Layers Properties of Foam Core Lightweight Panels (Vol. 14, Issue 1). https://doi.org/10.24451/arbor.13880

Shalbafan, A., Khojasteh-Khosro, S., & Thömen, H. (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products (Vol. 78, Issue 3). Springer. https://doi.org/10.24451/arbor.11671

Näher, T., Thömen, H., & Burgert, I. (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft. Swiss Wood Innovation Network S-Win. https://doi.org/10.24451/arbor.11261

Shalbafan, A., Nadali, A., & Thömen, H. (2020). A Multifunctional Mineral Binder for Plywood Production: The Effect of Manufacturing Parameters on Bonding Quality (Vol. 13, Issue 10). https://doi.org/10.24451/arbor.11898

Shalbafan, A., & Thömen, H. (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features (Vol. 10, Issue 2). MDPI. https://doi.org/10.24451/arbor.10248

Ozyhar, T., Depnering, T., Ridgway, C., Welker, M., Schoelkopf, J., Mayer, I., & Thömen, H. (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties (Vol. 78, Issue 1). Springer. https://doi.org/10.24451/arbor.9418

Bianchi, S., Thömen, H., Junginger, S., & Pichelin, F. (2019). Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties (Vol. 77, Issue 1). Springer. https://doi.org/10.24451/arbor.6781

Thömen, H. (2019). Rohstoffe effizienter einsetzen - das Modell dazu (Vol. 1). BFH. https://doi.org/10.24451/arbor.9419

Thömen, H., Homerin, B., Bernardy, G., & Steffen, A. (2019). Dichte von Holzwerkstoffen in Echtzeit vorhersagen (Issue 21). https://doi.org/10.24451/arbor.9489

Thömen, H., & Job, C. (2019). Hochflexible Beleuchtungslösungen in Möbeln (Vol. 2). BFH. https://doi.org/10.24451/arbor.9422

Thömen, H., & Wirth, F. (2018). Wohlbefinden - mittels Virtual Reality? (Vol. 3). BFH. https://doi.org/10.24451/arbor.9446

Thömen, H. (2017). Leichtigkeit im Möbelbau (Vol. 1). BFH. https://doi.org/10.24451/arbor.9440

Thömen, Heiko; Homerin, Benoit (2017). Modernste Prozessleittechnik - Integration eines mathematisch-physikalischen Modells in ein industrielles Prozessleitsystem In: 12. Holzwerkstoffkolloquium. Dresden, Germany. 14.-15.12.2017.

Shalbafan, A., Rheme, M., & Thoemen, H. (2016). Ultra-light particleboard: characterization of foam core layer by digital image correlation. (Vol. 75, Issue 1). Springer. https://doi.org/10.24451/arbor.5502

Yoon, Yonghoon; Plummer, Christopher JG; Thoemen, Heiko; Manson, Jan-Anders E (2016). Liquid CO2 processing of solid polylactide foam precursors. Journal of Cellular Plastics, 52(2), pp. 153-174. Sage Publications 10.1177/0021955X14537662 <http://dx.doi.org/10.1177/0021955X14537662>

Thömen, Heiko; Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.

Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.

Benthien, Jan T.; Thömen, Heiko (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels Journal of Applied Polymer Science, 129(6), pp. 3710-3717. John Wiley & Sons, Ltd 10.1002/app.39155 <http://dx.doi.org/10.1002/app.39155>

Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y <http://dx.doi.org/10.1007/s00107-013-0719-y>

Sanabria, S. J., Hilbers, U., Neuenschwander, P. and S., Niemz, P., Sennhauser, U., Thömen, H., & Wenker, J. L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images (Vol. 53, Issue 1). Elsevier. https://doi.org/10.24451/arbor.11283

Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346 <http://dx.doi.org/10.1002/app.34346>

Barbu, M., Romania, B., Ludtke, J., Thömen, H., & Welling, J. (2010). New technology for the continuous production of wood-based lightweight panels. Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. United Nations Economic Commission for European Timber Committee. https://doi.org/10.24451/arbor.11592

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Shalbafan, A., Luedtke, J., Welling, J., & Thömen, H. (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials. Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. https://doi.org/10.24451/arbor.11641

Thömen, H., & Gonin, M.-A. (2010). European master programs in wood science and technology. Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. United Nations Economic Commission for Europe – Timber Committee. https://doi.org/10.24451/arbor.11604

Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau